Strings en Python con ejemplos

Strings en Python con ejemplos

https://www.snakify.org/en/lessons/strings_str/

Lesson 5
Strings

• Theory
• Steps
• Problems

1. Strings

A string can be read from the standard input using the function input() or defined in single or double quotes. Two strings can be concatenated, and we can also repeat a string n times multiplying it by integer:

 step by step   python js java 

1
print('>_< ' * 5)  # >_< >_< >_< >_< >_<

A string in Python is a sequence of characters. The function len(some_string) returns how many characters there are in a string:

 step by step   python js java 

1
print(len('abcdefghijklmnopqrstuvwxyz'))  # 26

Every object in Python can be converted to string using the function str(some_object). So we can convert numbers to strings:

 step by step   python js java 

1
2
3
s = str(2 ** 100)
print(s)  # 1267650600228229401496703205376
print(len(s))  # 31

2. Slices: single character

A slice gives from the given string one character or some fragment: substring or subsequence.

There are three forms of slices. The simplest form of the slice: a single character slice S[i] gives ith character of the string. We count characters starting from 0. That is, if S = 'Hello', S[0] == 'H', S[1] == 'e', S[2] == 'l', S[3] == 'l', S[4] == 'o'. Note that in Python there is no separate type for characters of the string. S[i] also has the type str, just as the source string.

Number i in S[i] is called an index.

If you specify a negative index, then it is counted from the end, starting with the number -1. That is, S[-1] == 'o', S[-2] == 'l', S[-3] == 'l', S[-4] == 'e', S[-5] == 'H'.

Let's summarize it in the table:

String S	H	e	l	l	o
Index	S[0]	S[1]	S[2]	S[3]	S[4]
Index	S[-5]	S[-4]	S[-3]	S[-2]	S[-1]

If the index in the slice S[i] is greater than or equal to len(S), or less than -len(S), the following error is caused IndexError: string index out of range.

3. Slices: substring

Slice with two parameters S[a:b] returns the substring of length b - a, starting with the character at index a and lasting until the character at index b, not including the last one. For example, S[1:4] == 'ell', and you can get the same substring using S[-4:-1]. You can mix positive and negative indexes in the same slice, for example, S[1:-1] is a substring without the first and the last character of the string (the slice begins with the character with index 1 and ends with an index of -1, not including it).

Slices with two parameters never cause IndexError. For example, for S == 'Hello' the slice S[1:5] returns the string 'ello', and the result is the same even if the second index is very large, like S[1:100].

If you omit the second parameter (but preserve the colon), then the slice goes to the end of string. For example, to remove the first character from the string (its index is 0) take the slice S[1:]. Similarly if you omit the first parameter, then Python takes the slice from the beginning of the string. That is, to remove the last character from the string, you can use slice S[:-1]. The slice S[:] matches the string S itself.

4. Slices: immutability of strings

Any slice of a string creates a new string and never modifies the original one. In Python strings are immutable, i.e they can not be changed as the objects. You can only assign the variable to the new string, but the old one stays in memory.

In fact in Python there is no variables. There are only the names that are associated with any objects. You can first associate a name with one object, and then — with another. Can several names be associated with one and the same object.

Let's demonstrate that:

 step by step   python js java 

1
2
3
4
5
s = 'Hello'
t = s  # s and t point to the same string
t = s[2:4]  # now t points to the new string 'll'
print(s)  # prints 'Hello' as s is not changed
print(t)  # prints 'll'

5. Slices: subsequence

If you specify a slice with three parameters S[a:b:d], the third parameter specifies the step, same as for function range(). In this case only the characters with the following index are taken: a a + d, a + 2 * d and so on, until and not including the character with index b. If the third parameter equals to 2, the slice takes every second character, and if the step of the slice equals to -1, the characters go in reverse order. For example, you can reverse a string like this: S[::-1]. Let's see the examples:

 step by step   python js java 

1
2
3
4
5
6
7
8
9
10
11
s = 'abcdefg'
print(s[1])
print(s[-1])
print(s[1:3])
print(s[1:-1])
print(s[:3])
print(s[2:])
print(s[:-1])
print(s[::2])
print(s[1::2])
print(s[::-1])

Note how the third parameter of the slice is similar to the third parameter of the function range():

 step by step   python js java 

1
2
3
4
s = 'abcdefghijklm'
print(s[0:10:2])
for i in range(0, 10, 2):
    print(i, s[i])

6. String methods: find() and rfind()

A method is a function that is bound to the object. When the method is called, the method is applied to the object and does some computations related to it. Methods are invoked as object_name.method_name(arguments). For example, in s.find("e")  the string method find() is applied to the string s with one argument "e".

Method find() searches a substring, passed as an argument, inside the string on which it's called. The function returns the index of the first occurrence of the substring. If the substring is not found, the method returns -1.

 step by step   python js java 

1
2
3
4
5
6
7
s = 'Hello'
print(s.find('e'))
# 1
print(s.find('ll'))
# 2
print(s.find('L'))
# -1

Similarly, the method rfind() returns the index of the last occurrence of the substring.

 step by step   python js java 

1
2
3
4
5
s = 'abracadabra'
print(s.find('b'))
# 1
print(s.rfind('b'))
# 8

If you call find() with three arguments s.find(substring, left, right), the search is performed inside the slice s[left:right]. If you specify only two arguments, like s.find(substring, left), the search is performed in the slice s[left:], that is, starting with the character at index left to the end of the string. Method s.find(substring, left, right) returns the absolute index, relatively to the whole string s, and not to the slice.

 step by step   python js java 

1
2
3
4
5
s = 'my name is bond, james bond, okay?'
print(s.find('bond'))
# 11
print(s.find('bond', 12))
# 23

7. String methods: replace()

Method replace() replaces all occurrences of a given substring with another one. Syntax: s.replace(old, new)  takes the string S and replaces all occurrences of substring old with the substring new. Example:

 step by step   python js java 

1
2
print('a bar is a bar, essentially'.replace('bar', 'pub'))
# 'a pub is a pub, essentially'

One can pass the third argument count, like this: s.replace(old, new, count). It makes replace() to replace only first count occurrences and then stop.

 step by step   python js java 

1
2
print('a bar is a bar, essentially'.replace('bar', 'pub', 1))
# 'a pub is a bar, essentially'

8. String methods: count()

This method counts the number of occurrences of one string within another string. The simplest form is this one: s.count(substring). Only non-overlapping occurrences are taken into account:

 step by step   python js java 

1
2
3
4
print('Abracadabra'.count('a'))
# 4
print(('aaaaaaaaaa').count('aa'))
# 5

If you specify three parameters s.count(substring, left, right), the count is performed within the slice s[left:right].