Remover marca de agua de windows 8.1 - How to Remove "Test Mode Windows 8.1 Build 9600" Watermark from Desktop

http://www.eightforums.com/tutorials/41983-test-mode-windows-8-1-build-9600-watermark-remove.html

How to Remove “Test Mode Windows 8.1 Build 9600" Watermark from Desktop

   Information

This tutorial will show you how to remove the Test Mode Windows 8.1 Build 9600 type watermark from the lower right corner of your desktop with or without turning off test mode in Windows 8 and Windows 8.1.

If you have an edition (ex: Pro, or Enterprise) of Windows 8/8.1 installed other than the core edition, then the watermark message will also include the edition.

• Test Mode Windows 8 Build 9200
• Test Mode Windows 8.1 Build 9490
• (core) Test Mode Windows 8.1 Build 9600
• (Pro) Test Mode Windows 8.1 Pro Build 9600
• (Enterprise) Test Mode Windows 8.1 Enterprise Build 9600

You must be signed in as an administrator to be able to do the steps in this tutorial.

   Note

According to Microsoft, the test mode watermark can appear if the test signing mode is started on the computer. This test mode may occur if an application whose drivers are not digitally signed by Microsoft is installed and still in the test phase. Microsoft added test mode to Windows so that users can test programs without having to provide an authentication certificate.

The TESTSIGNING boot configuration option determines whether Windows Vista and later versions of Windows will load any type of test-signed kernel-mode code. This option is not set by default, which means test-signed kernel-mode drivers will not load by default on 64-bit versions of Windows Vista and later versions of Windows.

For 64-bit versions of Windows Vista and later versions of Windows, the kernel-mode code signing policy requires that all kernel-mode code have a digital signature. However, in most cases, an unsigned driver can be installed and loaded on 32-bit versions of Windows Vista and later versions of Windows.

EXAMPLE: "Test Mode Windows 8.1 Pro Build 9600" type Watermark

OPTION ONE

Remove "Test Mode" Watermark by Turning Off Test Mode

1. Open an elevated command prompt.

2. In the elevated command prompt, copy and paste the command below and press Enter. (see screenshot below)

bcdedit.exe -set TESTSIGNING OFF

   Note

If you get the "The value is protected by Secure Boot policy and cannot be modified or deleted." error, then it mean that you must disable Secure Boot first, do this tutorial again, then enable Secure Boot when finished.

3. Close the elevated command prompt.

4. Restart the computer to apply.

OPTION TWO

Remove "Test Mode" Watermark without Turning Off Test Mode

1. Go to the Softpedia link below, and download My WCP Watermark Editor.

Download My WCP Watermark Editor 1.1.0

2. Run the downloaded My_WCP_Watermark_Editor.exe file.

3. If prompted by UAC, then click/tap on Yes.

4. Do step 5 or 6 below for what you would like to do.

5. To Remove Watermark

A) Check the Remove all watermark box at the top, click/tap on Apply new settings, and go to step 7 below. (see screenshot below)

6. To Restore Default Settings

A) Click/tap on Restore default settings, and go to step 7 below. (see screenshot above)

7. When finished, click/tap on Done, Click for reboot, after reboot reset your wallpaper to see all change. (see screenshot below)

8. When your computer finishes restarting, reset your wallpaper to see the change.

That's it,
Shawn